Introduction |
|
Products |
|
Specification |
|
Inquiry |
|
Contact Us |
|
Home |
 |
 |
 |
|
| TYPE I
INSERT NUTS (SFNB SERIES) Corresponds to Type B, but looks More Pleasant on The Surface After Being Knocked In. Material: Zinc Alloy Die Casting |
 |
 |
|
| METRIC (YELLOW ZINC PLATED) | ||||||||||
| ITEM NO. | THREAD X L | L |
 |
h |
D1 |
D |
d | PILOT HOLE |
Q'TY/CTN |
G.W./CTN |
| SFNBM407125 | M4 X 12.5 | 12.5 | 8 | 2.5 | 11.0 | 8.0 | 6.0 | 5.6-6.0 | 6,500 | 16.6 |
| SFNBM508105 | M5 X 10.5 | 10.5 | 7 | 2.0 | 14.0 | 10.0 | 7.5 | 7.1-7.5 | 5,000 | 17.0 |
| SFNBM610135 | M6 X 13.5 | 13.5 | 10 | 2.0 | 17.0 | 11.0 |
8.4 |
8.0-8.4 |
3,000 | 15.8 |
| SFNBM61020 | M6 X 20.0 | 20.0 | 15 |
2,000 | 13.4 | |||||
| SFNBM8125175 | M8 X 17.5 | 17.5 | 13 | 12.6 | 10.0 | 9.6-10.0 | 2,000 |
13.0 | ||
| INCH UNC (ZINC PLATED) | ||||||||||
| ITEM NO. | THREAD X L | L |
|
h |
D1 |
D |
d | PILOT HOLE | Q'TY/CTN |
G.W./CTN |
| SFNB0832125 | 8-32X12.5 | 12.5 | 8 | 2.5 | 11.0 | 8.0 | 6.0 | 5.6-6.0 | 6,500 | 16.6 |
| SFNB1024105 | 10-24X10.5 | 10.5 | 7 | 2.0 | 14.0 | 10.0 | 7.5 | 7.1-7.5 | 5,000 | 17.0 |
| SFNB1032105 | 10-32X10.5 | 10.5 | 7 | 2.0 | 14.0 | 10.0 | 7.5 | 7.1-7.5 | 5,000 | 17.0 |
| SFNB1420135 | 1/4-20X13.5 | 13.5 | 10 | 2.0 | 17.0 | 11.0 |
8.4 |
8.0-8.4 |
3,000 | 15.8 |
| SFNB142020 | 14-20X20.0 | 20.0 |
15 |
2,000 | 13.4 | |||||
| SFNB51618175 | 5/16-18X17.5 | 17.5 | 13 | 12.6 | 10.0 | 9.6-10.0 |
2,000 |
13.0 | ||
| TYPE JCN
CAP NUTS JCN Cap Nuts are designed for use with type JCB-A joint connector bolts. the head diameters of both bolt and cap are identical enhancing the surface finish to both sides of the joint assembly. Material: Mild Steel |
 |
 |
|
| METRIC | ||||||||
| ITEM NO. | THREAD X L |
L |
|
D1 |
D |
B | Q'TY/CTN | G.W/CTN |
| JCNM50816 | M5 X 16 | 16.0 | 11.0 | 13.0 | 6.3 | 4 |
5,000 |
18.4 |
| JCNM61012 | M6 X 12 | 12.0 | 8.0 | 17.0 | 9.0 | 5 |
3,000 |
21.3 |
| JCNM61017 | M6 X 17 | 17.0 | 13.0 |
2,400 |
20.9 |
|||
| JCNM61025 | M6 X 25 | 25.0 | 20.0 | |||||
| JCNM812517 | M8 X 17 | 17.0 |
12.0 |
2,000 |
20.5 |
|||
| JCNM812525 | M8 X 25 | 25.0 | 20.0 | 11.0 | ||||
|
*M6 in 4mm hex drive is available upon customer' opplication. |
||||||||
| INCH UNC | ||||||||
| ITEM NO. | THREAD X L |
L |
|
D1 |
D |
B | Q'TY/CTN | G.W/CTN |
| JCN102416 | 10-24 X 16 | 16.0 | 11.0 | 13.0 | 6.3 | 4 |
5,000 |
18.4 |
| JCN103216 | 10-30 X 16 |
5,000 |
18.4 |
|||||
| JCN142012 | 1/4-20 X 12 | 12.0 | 8.0 | 17.0 | 9.0 | 5 |
3,000 |
21.3 |
| JCN142017 | 1/4-20 X 17 | 17.0 | 13.0 |
2,400 |
20.9 |
|||
| JCN142025 | 1/4-20 X 25 | 25.0 | 20.0 | |||||
| JCN5161817 | 5/16-18 X 17 | 17.0 | 12.0 | 11.0 |
2,000 |
20.5 |
||
| JCN5161825 | 5/16-18 X 25 | 25.0 | 20.0 | |||||
| Standard Finishes: ZP/YZP/BO/STB/BP/NP(Please
refer to Specifications) *1/4-20 in 4mm hex drive is available upon customers' application. *HDT means hex drive with through the hole. |
||||||||
 |
 |
|||||||
 |
||||||||
|
1st F1., No.91-1, Chung Ho Street, Hsin Chuang, Taipei Hsien 242, Taiwan, R.O.C.
TEL: +886-2 2277 3121 FAX: +886-2 2990 0691 http:// www.younturn.com.tw e-mail: younturn@ms34.hinet.net |
||||||||