Introduction |
|
Products |
|
Specification |
|
Inquiry |
|
Contact Us |
|
Home |
 |
 |
 |
|
| TYPE
P INSERT NUTS (INSE SERIES) Designed with a straicht barrel and serrations on the external threads for a biting or sawing effect that reduces the amount of entry torque required. This straight shank insert can be put in a smaller pilot hole which can be a factor for edge or end grain applications. Material: Zinc Alloy Die Casting |
 |
 |
|
| METRIC (YELLOW ZINC PLATED) | |||||||
| ITEM NO. | THREAD X L |
L |
D |
d |
PILOT HOLE |
Q'TY/CTN |
G.W./CTN |
| INSEM61013 | M6 X 13 | 13.0 | 11.2 | 8.5 | 8.4-8.7 | ||
| INCH ( ZINC PLATED) | |||||||
| ITEM NO. | THREAD X L |
L |
D |
d |
PILOT HOLE |
Q'TY/CTN |
G.W./CTN |
| INSE142013 | 1/4-20 X 13 | 13.0 | 11.2 | 8.5 | 8.4-8.7 | ||
| TYPE J
INSERT NUTS (INSJ SERIES) Popularly used with adjustable glides or castors. Counter sunk holes in the flange are designed for a screw to state fasteners. The ribbed barrel also restricts fastener from turning when tightened and aids retention. Material: Zinc Alloy Die Casting |
 |
 |
|
| METRIC (YELLOW ZINC PLATED) | |
| ITEM NO. | THREAD X L |
L |
h |
D1 |
D |
d | PILOT HOLE |
Q'TY/CTN |
G.W./CTN |
| INSJM8125125 | M8 X12.5 | 12.5 | 2.5 | 32.0 | 15.0 | 12.0 | 11.6-12.0 | 1,400 | 15.9 |
| *INSJM1015125 | M10 X 12.5 | 12.5 | 2.5 | 32.0 | 15.0 | 12.0 | 11.6-12.0 | ||
| INCH (ZINC PLATED) | |||||||||
| ITEM NO. | THREAD X L |
L |
h |
D1 |
D |
d | PILOT HOLE |
Q'TY/CTN |
G.W./CTN |
| INSJ51618125 | 5/16-18 X 12.5 | 12.5 | 2.5 | 32.0 | 15.0 | 12.0 | 11.6-12.0 | 1,400 | 15.9 |
| *INSJ3816125 | 3/8-16 X 12.5 | 12.5 | 2.5 | 32.0 | 15.0 | 12.0 | 11.6-12.0 | ||
| *Notice: marked * items must be needed 20 weeks for the normal lead time. | |||||||||
 |
 |
||||||||
 |
|||||||||
|
1st F1., No.91-1, Chung Ho Street, Hsin Chuang, Taipei Hsien 242, Taiwan, R.O.C.
TEL: +886-2 2277 3121 FAX: +886-2 2990 0691 http:// www.younturn.com.tw e-mail: younturn@ms34.hinet.net |
|||||||||